Print this page.  

Adhesives and Sealants

Indorez™ C5 Hydrocarbon resin
 
Indorez™ is a pale yellow resin of excellent color, heat stability and flow characteristics and highly recommended for use in Hot-Melt Road Marking paints. It is manufactured from aliphatic stream (C-5 fraction) of petroleum feedstock by polymerization. This resin shows outstanding affinity for pigments and compatibility with fillers, oils and other additives. It offers excellent processability in Hot-Melt Road Marking paint application.
   TDS
 
   Request A Quote



Indorez™ C9 Hydrocarbon Resin
Indorez™ C9 Hydrocarbon Resin, H-120-14 resin is thermo-polymerized C9 aromatic hydrocarbon resins which has following key characteristics.
- Lower odor and no PAHs contains
- Improve tack, bond strength, and down the cost in adhesive.

   TDS
 
   Request A Quote



OnWax Polyethylene Wax
 
OnWax is a polyethylene wax, having unique combination of high melting point, hardness and low melt viscosity. These characteristics enable modification of viscosity and softening point, reduces glass beads settling & provides resistance to abrasion. Thus OnWax 600200 proves to be a perfect high performance additive for Hot Melt Road Marking paints.

   TDS
 
   Request A Quote



EVA
 
EVA copolymers stand out for its excellent processability and flexibility, as well as being highly compatible with other polymers, additives, and fillers. The basic variables that determine the type and characteristics of an EVA copolymer, and consequently the characteristics of a Ho™elt are:

1. The polymers molecular weight (MW).
2. The vinyl acetate content (VA)
3. The variation of VA not only affects its compatibility with other raw materials, but also influences almost all the other characteristics such as softening point, bonding strength, specific adhesion, cost, flexibility, tenacity at low temperature, etc.

 
EVA - Ethylene Vinyl Acetate
 
   TDS
    MSDS
   Request A Quote

TOP